GT505K系列電機智能監控裝置主要功能特征及創新點：

■ 輔助電源支持DC 110/220V或AC220V。

■ 硬件體系采用分布式結構設計，模塊化、標準化程度高，安裝方便，易于組網，便于現場維護。

■ 所有接線全部采用即插即拔的插頭聯接方式，使用具有高可靠性的插件，徹底消除接觸不良的隱患。

■ 采用背插式結構，強弱電完全分開，可大大減少外部電磁干擾在弱電側的耦合，增強裝置的抗干擾能力，提高其可靠性和安全性。

■ 配置有過載、欠功率、堵轉、阻塞、電流不平衡、斷相、接地、漏電、欠壓、過壓、接觸器分斷能力、速斷、短路等保護功能。

■ 標配有遙信起動(保護器自身起動)、直接起動(機旁按鈕盒全壓起動)、正反起動降壓起動(星三角、自耦變壓器、頻敏變阻器起動)等多種起動方式，而且起動方式可現場設定。

■ 標配測量參數信息、故障記錄、運行管理信息、方便查詢故障原因，進行電機維護。

■ 標配來電自起動功能，以及抗晃電功能、失壓重起動、分批重起動功能。

■ 標配接地保護功能，可通過附加增選零序電流測量的漏電保護功能。

■ 高清晰度LCD液晶屏及漢字顯示，簡單易用的中文菜單技術，收集的各類信息隨時顯示，特別適用于現場調試和維護。

■ 采用工業級微處理器，構成的高性能成套保護測控裝置，具備保護、測量、控制和報警功能。

■ DI/D0開關量輸入輸出可自由選定已編程功能。

■ DI支持干接點輸入，由裝置自身供給DC24V電源作保證，而不要需要外界輔助電源。

■ 配有1路標準的4-20mA電流變送輸出。

■ 標準RS-485通訊接口，ModbusRTU通訊規約。

■ 提升版具有熱積累記憶及熱釋放記憶功能，填補了電動機保護器具有熱積累記憶及熱釋放記憶功能的空白。

Main functions, features and innovations of GT505K series motor intelligent monitoring device:

- support DC 110/220V or AC220V auxiliary power supply.

In the hardware system using distributed architecture design, modular, high degree of standardization, convenient installation, easy networking, convenient on-site maintenance.

- all the wiring used in all plug and plug connection drawing, using high reliability of the plug-in, eliminate the hidden danger of bad contact.

In the back insert structure, electrical completely separate, can greatly reduce the external electromagnetic interference coupling in low voltage side, enhance the ability of anti-jamming devices, improve the reliability and safety.

- equipped with overload, less power, blocking, blocking, current imbalance, phase failure, grounding, leakage, overvoltage, undervoltage, contactor breaking capacity, fast breaking, short circuit protection function.

Remote starting - Standard (self starting protector), direct starting (machine side button box full voltage starting, starting and starting) (star delta, autotransformer, frequency sensitive rheostat starting) and other starting mode, and can set the starting mode.

In the standard measurement parameter information, fault records, operation management information, convenient query failure, motor maintenance.

In the standard call self starting function and anti shake function, loss of weight, starting batch restart function.

- standard grounding protection function, the leakage protection of zero sequence current measurement of additional members.

LCD - High Definition LCD screen display menu and Chinese characters, Chinese technology is simple and easy to use, all kinds of information collected at any time display, especially suitable for on-site commissioning and maintenance.

- using industrial grade high performance microprocessor, complete protection device structure, with protection, measurement and control and alarm function.

DI/D0 - switch input and output can be freely selected programming function.

- DI support dry contact input, by means of their own supply DC24V power as a guarantee, and do not need external auxiliary power supply.

Send the output 4-20mA current - with 1 standard variable.

Standard RS-485 communication interface, ModbusRTU communication protocol.

Has the heat accumulation and heat release of memory - memory upgrade version, fill the blank of motor protector has the heat accumulation and heat release of memory and memory function.